123 Hp Envy 5642 AirPrint Setup

AirPrint Setup is an extraordinary element with which you can print a document or a photo from an Apple device by connecting your HP compatible printer to a wireless network. If you are using an HP AirPrint compatible printer that includes wireless features, then the below information assist you set up AirPrint.

Procedure to carry out prints with Apple HP Envy 5642 AirPrint

Step 1: select out your HP Printer

On your Apple device from which are you are trying to print, open any document that you wish to print after opening the AirPrint app.  The menu bar has an Action icon.

If your device does not display Action icon, it is impossible to print from the AirPrint. This is caused because of some app that do not contain Action icon as an inbuilt element.

Touch Print and the Printer Options window are displayed. Numerous applications may not offer a print alternative as the app might not be compatible with AirPrint at that position. But if the Print option is unavailable, then it is impossible to print using AirPrint from that specific app.

Touch Select Printer under the Printer Options and it will show a list of network connected printers accessible. The drop-down menu in the Printer Options shows the HP printer that you have preferred.

If not mandatory, you can omit modifying the print options, and touch Print to transmit the print job to the HP printer. Proceed to the next step if you need to change the print options.

Use the steps exemplified below if you find it hard to obtain a printout with your local HP printer using AirPrint:

  • Make sure if your printer is powered on. If you notice that your printer is already turned on, then power it off and turn it on again.
  • Make sure that the printing concern is set on and you are able to print a job.
  • It is necessary that the HP Printer and the iOS device be connected to the same wireless network.
  • Verify whether the printer has been installed with the most up-to-date firmware version.
  • Confirm that the printer tray is filled with ample paper, and the ink cartridge or toner is not exhausted.
  • Make sure that the printer’s control panel does not display any error messages.

Cancel the print jobs from your AirPrint-enabled iOS device by performing the steps given below:

  • From the printer’s control panel, click the Cancel button to suspend the print job that you want to.
  • From your Apple device, press the Home button twice, touch the Print Center icon that is revealed at the lower side of the screen, and then under Print Summary tab, touch Cancel Printing.
Follow the below steps when you get No AirPrint Printers Found message on your Apple mobile:

Step 1: Bring the router and printer seal together and confirm the signal regularity.

Step 2: Perform a restart on all your devices and make sure that they are linked to the same wireless network, and print a network configuration page.If your printer is able to generate the test page, the issue is resolved. Else, you can continue the following step.

Step 3: Uninstall the current firmware of your printer and then download the updated version from website 123.hp.com/envy4500, reinstall it.

Step 4: Check if your Apple device is prompted to update its firmware software. If reported, follow the advice to finish the firmware update on your iOS device.

Step 5: Ensure that your printer is aided with the AirPrint feature.