123 HP DeskJet 2544 Printer Scan

Scanning is another important reason for buying a printer. Scanning setup for the first time requires a little sweat. Use the below HP DeskJet 2544 printer scan manual to get an enhanced view.

The information available below will let you perform the HP DeskJet 2544 printer scan to computer Windows. The HP DeskJet 2544 printer scan will initiate from downloading the full feature driver.

HP DeskJet 2544 scan software will be readily available in 123.hp.com/dj2544 and it can be downloaded effortlessly.

HP DeskJet 2544 printer scan troubleshooting can be if you have any concerns with your printer. There is quite a lot of basis when you dig up a scan error or scanning issue.


HP DeskJet 2544 scanner not working means you have to contact the customer support to get relevant help and benefits.  In this page, we will know about the HP DeskJet 2544 printer scan setup for the

Make use of your HP OfficeJet Pro 2544 printer to scan documents, photos and more. One of the rewards is that you can also carve up the scanned files to any end. You can also alter the scanned documents using the HP printer software.

Decide on the scan location and you can scan to any destination such as a computer or a memory device. To scan a borderless original, use the scanner glass as a replacement for the ADF

Scan to computer

HP DeskJet 2544 printer Scan to computer driver can be done easily by following the instructions given below.  To begin with, confirm whether the scan feature is enabled in your computer. Open the HP Printer software and click Scan. Now click

Manage Scan to computer.

To facilitate this aspect in OS X, open the HP Utility if you have installed the HP Scan.  Click Scan Settings, Scan to Computer and click

Enable Scan to Computer

  1. Load your original print-side down in the left-rear corner and touch Scan computer in the scanner glass. Touch Start Scan to scan and select the type of scan profile.
  2. You can fill your original print-side down in the left-rear corner and open the printer software either in the scanner glass or ADF.
  3. Click Scan a Document of Photo under the Print, Scan & Fax. From the shortcut menu, select the scan type and click Scan.
  4. Select the Show Scan Preview to make adjustments to the scanned image in the preview screen

Click Save to keep the Scan application open or select Done to exit the application. Click Scan and select a scan shortcut. You can continue to print using your Scan application.

Open the HP scan from the Application/Hewlett-Packard folder at the top level of the hard disk. Select the scan profile type and follow the instructions that appear on the screen.

Scan to memory device.

Use your HP software or computer to scan directly using the USB flash drive. Follow the below instructions and scan to the original memory device.

You can load your original print-side down in the left-rear corner or print-side up in the scanner glass or ADF. Insert the USB flash drive and touch Scan. Select the Memory Device. Touch Start Scan to modify changes to any other scan options.